Skip to Content
Shopping Basket
Your basket is empty.

Everbuild 710 Febflor Self Level Flexiplus Floor Levelling Compound Pallet

Ref: QR27239
Everbuild 710 Febflor Self Level Flexiplus Floor Levelling Compound Pallet
£1,205.00 inc. VAT
NOW £482.00
£578.40 inc. VAT
In Stock


Total Discount Price:

? x Everbuild 710 Febflor Self Level Flexiplus Floor Levelling Compound Pallet:
£482.00 ex VAT
Select Quantity and choose Add To Basket


Everbuild 710 Febflor Self Level Flexiplus Floor Compound Pallet 50 20kg bags

Everbuild 710 Febflor Self Level Flexiplus Floor Levelling Pallet

Everbuild 710 Self Level Flexiplus Floor Compound

Pallet Deal 50 x 20kg Bags

Trade Product Option: SLPLUS20-50


Latex modified cement based powder,

Everbuild 710 FEBFLOR Flexiplus already contains powdered latex,

eliminating the need for separate expensive latex liquids.

When mixed as directed the compound provides a free flowing mix

that sets in 90 minutes

Can be overlaid after only 8 hours at normal temperatures

When mixed with water, can be used to level out uneven floors and screeds.

Typical surfaces include concrete and screeding, existing ceramic tiles,

asphalt, wood, brick, stone etc.

Intended for use prior to laying ceramic tiles, thermoplastic tiles, lino,

wood block flooring or carpet.

Product Benefits:

For Internal & external use.

Enhanced flow properties coupled with long open time giving easy trowelling.

Fast setting - sets in 8 hours.

Up to 6mm in depth in one coat

Protein casein free.

Flexiplus uses:

Levelling uneven subfloors prior to covering tiling without the need to use

a separate latex additive

Product Notes:

NOTE: This product is not suitable for use as a final wearing surface.

Always mix with clean fresh water and always prime floors as directed.

Surfaces can be primed using Everbuild PVA Bond diluted 1:3 with water.

The product will not resist rising damp. In these conditions, use in conjunction

with BLACKJACK D.P.M liquid dampproof membrane as directed.

Never exceed the quantity of water stated this will dramatically reduce strength

and cause cracking.

Do not mix more compound than can be laid in 20 minutes and never try to

reconstitute once the product has set.

On substrates where underfloor heating is in place, switch of the heating for

24 hours before and after application.

Do not use this product below 4 deg C.

Everbuild 710 Technical Data Sheet

Everbuild 710 MSDS Safety Data Sheet

Everbuild 710 DOP Declaration fo Performance

Everbuild 710 Febfloor Manufacturer Product Page

"Important Note this is a non returnable product "

while in our care all products are kept in a climate controlled store room.

because this is a reactive product we could not resell the product.

The Product should be stored out of direct sunlight until used.


Reference Code:
Option Text:
20kg Pallet