Skip to Content
Shopping Basket
Your basket is empty.

Everbuild 710 Febflor Self Level Flexiplus Floor Compound 10kg Tub SLPLUSTUB10

Ref: QR26173
Everbuild 710 Febflor Self Level Flexiplus Floor Compound 10kg Tub SLPLUSTUB10
£25.80 inc. VAT
NOW £9.68
£11.61 inc. VAT
Manufacturer Size Discontinued See Alternative Below


Everbuild 710 SLPLUSTUB10 Self Level Flexiplus Floor Compound 10kg tub

Everbuild 710 Self Level Plexiplus 10kg SLPLUSTUB10

Everbuild 710 Febflor Self Level Flexiplus 10kg


Barcode: 5029347612672

Product Description:


cement based powder.

When mixed with water, can be used to level out uneven floors and screeds.

Typical surfaces include concrete and screeding, existing ceramic tiles,

asphalt, wood, brick, stone etc.

Intended for use prior to laying ceramic tiles, thermoplastic tiles, lino,

wood block flooring or carpet.

Everbuild 710 Flexiplus already contains powdered latex, eliminating the

need for separate expensive latex liquids.

When mixed as directed the compound provides a free flowing mix that

sets in 90 minutes

Can be overlaid after only 8 hours at normal temperatures


Enhanced flow properties coupled with long open time giving easy trowelling.

Fast setting - sets in 8 hours.

Up to 6mm in depth in one coat

Protein casein free.

For Internal & external use.

Flexiplus uses:

Levelling uneven subfloors prior to covering tiling without the need to use a

separate latex additive

Important Product Notes:

NOTE: This product is not suitable for use as a final wearing surface.

Always mix with clean fresh water and always prime floors as directed.

The product will not resist rising damp. In these conditions, use in conjunction

with BLACKJACK D.P.M liquid dampproof membrane as directed.

Never exceed the quantity of water stated this will dramatically reduce strength

and cause cracking.

Do not mix more compound than can be laid in 20 minutes and never try to

reconstitute once the product has set.

Surfaces can be primed using Everbuild PVA Bond diluted 1:3 with water.

On substrates where underfloor heating is in place,

Switch of the heating for 24 hours before and after application.

Do not use this product below 4 deg C.

SLPLUSTUB10 Datasheets:

Everbuild 710 Technical Data Sheet

Everbuild 710 MSDS Safety Data Sheet

Everbuild 710 DOP Declaration fo Performance

Everbuild 710 Febfloor Manufacturer Product Page


Reference Code:
Option Text:
10kg tub