Skip to Content
Shopping Basket
Your basket is empty.

Aquaseal Wet Room Waterproof Tanking Membrane 5 Litre

Ref: QR23703
Aquaseal Wet Room Waterproof Tanking Membrane 5 Litre
£33.54
£40.25 inc. VAT
NOW £22.47
£26.97 inc. VAT
In Stock

Purchase

Total Discount Price:

? x Aquaseal Wet Room Waterproof Tanking Membrane 5 Litre:
£26.97
 
£22.47 ex VAT
Select Quantity and choose Add To Basket

Description

Aquaseal Wet Room Waterproof Tanking Membrane 5 Litre

 

Everbuild aquaseal tanking membrane 5 litre AQWR

 

Product Option: Aquaseal Tanking Membrane 5 Litre

Aquaseal Waterproof Tanking Membrane is a ready to use liquid waterproofing compound that is applied in a 2 coat system by brush. It provides a permanently flexible watertight membrane on floors and walls prior to tiling in shower areas, wet rooms and wet zones and other areas subject to water exposure such as balconies and partially covered external areas. Non-hazardous and solvent free. It is quick drying and tiling can commence after 24 hours.

Can be used on its own in many applications where a flexible watertight membrane is required, or in conjunction with Aquaseal Tanking Primer, Aquaseal Tanking Tape and Aquaseal Tanking Drain Mat, as part of the Aquaseal Wet Room System, to provide a 100% waterproof membrane to conventional plaster and timber based boards. It can be applied to all common building substrates such as plasterboard, MDF, plywood cementitious boards, blockwork, concrete & speciality wet room boards.

Benefits

  • Can be used on most common building surfaces.
  • Ready to use, no diluting necessary.
  • Easy to apply by brush.
  • Non-hazardous, solvent free.
  • Can be tiled over after 24 hours.

Areas for Use

  • For showers, wet rooms and wet zones in bathrooms
  • As a Tanking membrane as part of the Aquaseal Wet Room System.
  • As a Primer on most common building surfaces.
  • Balconies and partially covered external areas.

Surface Preparation

All surfaces must be clean sound and dust free.

Application

Surfaces should be clean, dry and dust free. Prime porous and semi porous substrates with Aquaseal Tanking Primer and allow to dry for one hour before applying the membrane.

Apply by brush in two coats which should be applied in different directions at right angles to each other to ensure full surface coverage is achieved with no weak spots.

Apply the first coat horizontally and allow to dry for 6 -12 hours. Then apply the second coat vertically

Pay careful attention to edges and corners to ensure that the coverage in these areas is always consistent as these are the potential weak spots where leakage could occur. We always recommend the use of Aquaseal Tanking Tape on corners and board joints prior to applying the membrane to ensure the integrity of the watertight seal. Aquaseal Tanking Tape provides cross directional movement at corners and on board joints and is available in 10 Metre rolls. The Aquaseal Tanking Drain Mat is also recommended around the drain outlet, which is the area most susceptible to leaks.

As a guide the finished two coat system, when dry, should have a minimum thickness of 1mm.

Allow the second coat to dry thoroughly for up to 12 hours before tiling.

 

Technical Data Sheet

MSDS Safety Data Sheet

Related Products

Aquaseal Wet Room Tanking Primer 1 Litre
Aquaseal Wet Room Tanking Waterproof Drain Mat
Blue Spot 63.5mm 2 1/2 Inch 65mm Pure Bristle Paint Brush
Aquaseal Wet Room Waterproof Tanking Corner Tape 10 Meters
Aquaseal Wet Room Tanking System Large 7.5 Meter Kit
Aquaseal Wet Room Tanking System Standard Size Kit 4.5 Meter

 

Extensions

default
Reference Code:
aqwrsmem5
Option Text:
5 litre